Additional Requirements - Net2Phone Max 410 User Manual

Max 410/420/430
•
A Max 410/420/430 unit and power cord.
•
A Local Area Network (LAN) with a broadband
connection, which must not have proxy server
caching.
•
If your LAN uses static addresses you will also
need: an IP address, netmask, and gateway
address for the Max (all available from your
Network Administrator).
•
With FXS ports: a corded or cordless analog
telephone, and additional analog devices as
desired for each port. Optional: a PBX, APBX, or
KPS with an analog trunk card installed.
•
With FXO ports: a PBX, APBX, or KPS with an
analog line card installed.
•
A Net2Phone account number and PIN
(available from your reseller).
•
A separate port with its own telephone line
connection to the PBX, or to an analog
telephone, is required for each concurrent
telephone call desired. For example, if capability
for 3 concurrent calls is desired, then the Max
must have at least 3 ports, each connected to
the PBX or to an analog telephone.

1.4.2 Additional Requirements

To configure and manage the unit, you will need:
•
A PC workstation with any recent Web browser,
connected to the LAN.
•
For Max units with FXO ports only (for initial
LAN configuration):
The HyperTerminal PC application (included
–
in all Microsoft operating systems), or an
equivalent terminal-emulator application.
– A standard serial cable (see Section 2.1.2.1)
5