The Hardware Setup Procedure - Net2Phone Max 410 User Manual

NOTE: On the Max 410, LAN
settings must be configured using a
PC with a serial cable connection.
For details see Section 2.1.2
Connecting to the Max 410 Through
a Serial Cable in this Guide.

1.4.3 The Hardware Setup Procedure

1.4.3.1 The Hardware Installation Guide
A Hardware Installation Guide that describes
hardware installation, cabling, and safety-related
issues provided along with your Max
410/420/430 unit. Please read that manual in its
entirety before beginning your hardware
installation. Make sure you completely
understand the issues discussed and, in
particular, the safety warnings given.
1.4.3.2 Steps in the Hardware Setup Procedure
The steps you will follow to set up your Max
410/420/430 are:
1. Install the Max 410/420/430 unit in its
location and connect the cabling.
2. Configure the LAN settings on the Max
410/420/430 so that it communicates with
your LAN.
3. Log in to the Max 410/420/430 Web
Manager.
4. Finish configuring your FXS ports via the
Web Manager.
5. Test your installation by making an Internet
telephone call.
User's Guide Section 1
6