Completing The Max 4'S Configuration; Network And Voice Configuration - Net2Phone MAX 4 Quick Start Manual

Completing the MAX 4's configuration

For the purposes of this Quick Start Guide, only a few more parameters need to be
configured before you can start making calls with the MAX 4. Additional information about
configuration can be found in the Net2Phone MAX 4 User Guide.

Network and Voice Configuration

Click the Network and Voice Config link on the Site Map page to access the Network and
Voice Configuration page, illustrated below.
Figure 5
DHCP Users: If your LAN is using DHCP addresses, you do not have to configure this page.
You may proceed directly to Configure Account, below.
Page 7