Net2Phone MAX 4 Setup
Hardware Setup
The basic Net2Phone MAX 4 Hardware setup is simple. Only four connections are needed for
operation:
Figure 1
1.
Plug the analog telephone jacks into the RJ-11 ports.
2.
Plug the RJ-45 jack into the LAN port.
3.
Plug the Net2Phone MAX 4 into your power outlet and turn the unit on.
The basic MAX 4 hardware setup is now complete. If your installation includes a PBX, connect
it as illustrated in Figure 1.
The next step is to connect the unit to your LAN so that you can browse the MAX Web Manager.
Page 2