TRANSMISSION
7.1.2.
CHECK
•
Check that the cardan joint is in good condition, that
the gear teeth engaging in the union grooves and the
joint grooves are not damaged or worn. Replace the
joint if necessary.
•
Check that the rubber bellow is not cut or pierced.
Replace if necessary.
•
Check that the threadings of swingarm shafts and nuts
are in good condition, and not damaged or flat.
Replace them if necessary.
•
Check that the union grooves are in good condition,
and not damaged or worn. Replace if necessary.
•
Check that the union outer teeth and inner grooves are
not damaged.
7 - 6
Breva V1100