Right Footrest Plate - MOTO GUZZI Breva V1100 Workshop Manual

CYCLE PARTS
5.3.2.

RIGHT FOOTREST PLATE

• To remove the right footrest plate, first secure the
vehicle front end using the low front stand (OPT) and
the vehicle rear end using slings and a hoist.
•
Remove the right side body panel, see (REMOVING
THE FUEL TANK).
•
Loosen and remove the two lower screws, set aside
the nuts.
•
Loosen and remove the two screws.
•
Remove the rear brake caliper from the disc.
• Loosen and remove the four screws of the rear brake
hose guides.
5 - 28
Breva V1100