MOTO GUZZI Breva V1100 Workshop Manual page 88

CYCLE PARTS
• Let oil drain off completely.
•
Set aside the preload tube.
NOTE Push the rod inside the sleeve so that oil will flow out
more easily.
•
Carefully check every part of the leg and make sure
nothing is damaged.
• Fill the rod with fluid only if parts are in good condition;
replace any damaged or worn parts.
FILLING:
•
Tighten the sleeve in a vice.
•
Pour oil inside.
Quantity of oil (per leg): 400 ± 2.5 cm
•
Pump the tube, make sure oil has completely filled the
damper rod.
5 - 8
3 3
(24.4 ± 0.15 in ).
Breva V1100