MOTO GUZZI Breva V1100 Workshop Manual page 98

CYCLE PARTS
• Slide out the wheel shaft.
•
Position the wheel together with spacer on the right
side.
•
Install the pin.
•
Tighten the clamp screws (nut side) to lock the wheel
shaft.
•
Fit the washer on the wheel shaft.
• Tighten the wheel shaft securing the nut to the
specified torque.
•
Work the fork to make sure that the fork legs are
aligned.
•
Tighten the wheel shaft clamp screws to the specified
torque.
5 - 18
Breva V1100