MOTO GUZZI Breva V1100 Workshop Manual page 42

PERIODIC MAINTENANCE
• Unscrew and remove the filler plug (3).
•
Drain the oil into the container and let all the oil drip out
for several minutes.
•
Check the sealing washers of the drain plug (2) and
replace if worn.
• Clean off any metal debris sticking to the drain plug (2)
magnet.
• Refit the drain plug (2) and tighten.
•
Fill with fresh engine oil, see (LUBRICANT TABLE)
until the level is above the minimum mark MIN.
CHANGING THE ENGINE OIL FILTER
• Unscrew the engine oil filter from its housing to remove
it.
NOTE Do not use filters that have already been used.
• Smear some oil on the new oil filter seal.
•
Fit and screw the new oil filter in its housing.
2 - 18
Breva V1100