CYCLE PARTS
5.1.4.
DISASSEMBLING THE FORK LEG
•
Drain all oil from the stanchion, see (CHANGING THE
FRONT FORK FLUID).
•
Tighten the sleeve in a vice.
•
Loosen the bottom screw and remove it with its gasket.
•
Remove the dust seal, pry with a screwdriver.
WARNING
Be careful not to damage the sleeve edge and
the dust seal.
•
Pull up the dust seal to remove it.
•
Remove the snap ring from inside the sleeve using a
screwdriver.
WARNING
Be careful not to damage the sleeve edge.
5 - 10
Breva V1100