MOTO GUZZI Breva V1100 Workshop Manual page 117

ELECTRICAL SYSTEM
Breva V1100
11 INTAKE AIR TEMPERATURE SENSOR
NTC-type sensor
resistance: 3.7 KΩ (at 20°C – 68°F)
12 ENGINE SPEED SENSOR
inductive-type sensor, with shielding cable.
Winding resistance: 650 Ω (to be measured across pins 1
and 2).
Output voltage: 0-5 V (to be measured when cranking).
Air gap: 0.5 – 0.7 mm (0.0197 – 0.0276 in).
13 AUXILIARY FUSES
a – Stop, horn, Hazard button illumination, light relay coil (15
A).
b – Parking lights, starter relay coil, passing (15 A).
c – Fuel pump, coils, injectors (20 A).
d – Lambda heater, secondary injection relay coil, starter
relay coil, speed sensor power supply (15 A).
e – Permanent positive, ECU power supply (3A).
NOTE There are three spare fuses (3, 15, 20 A).
14 HEAD TEMPERATURE SENSOR
NTC-type sensor
resistance: 3.7 KΩ (at 20°C – 68°F)
resistance: 220 Ω (at 100°C – 212°F)
6 - 7