MOTO GUZZI Breva V1100 Workshop Manual page 48

PERIODIC MAINTENANCE
• Remove both pins.
•
Remove the vibration damper.
•
Remove one pad at a time.
WARNING
Do not operate the brake lever when the pads
are not in place or the caliper pistons might
come off their housing, thus causing brake
fluid leakage.
•
Install two new pads. Fit them so the holes match
those on the caliper.
WARNING
Always change both pads and make sure they
are correctly in place inside the caliper.
•
Fit the vibration damper.
• Fit both pins.
•
Fit both split pins.
• Check the brake fluid level.
2 - 24
Breva V1100