Refitting The Swingarm - MOTO GUZZI Breva V1100 Workshop Manual

Breva V1100
7.1.3.

REFITTING THE SWINGARM

• Smear some grease all along the swingarm shaft.
•
Fit the ring nut to the swingarm shaft and tighten
snugly.
•
Support the swingarm, fit the cardan joint, match the
holes and simultaneously fit the shaft completely with
the assistance of a second person.
•
Tighten the swingarm shaft.
NOTE Prepare the suitable special tool (OPT):
- Guzzi part# 05.91.26.30 (tool for tightening the
swingarm shaft ring nut).
•
Tighten the ring nut using the suitable box wrench.
•
Tighten the two screws on the swingarm clamp.
TRANSMISSION
7 - 7