Medialink MWN-WAPR150N User Manual page 87

secondary
follows:
Primary Router Configuration
—
IP Adress: 192.168.0.1
—
Subnet Mask: 255.255.255.0
—
WLAN SSID: Your Choice
—
WLAN Security: Your Choice
—
Broadcast Channel: Your choice (default is 6 )
—
Channel Extension: Your choice (default is 10)
—
WDS Mode: Lazy
—
WDS Encrypt: None
—
DHCP Server: Enabled
—
Prevent Network Attack (Firewall): Enabled
Secondary Router Configuration
—
IP Address: 192.168.0.X (last digit different than Primary)
—
Subnet Mask: 255.255.255.0
—
WLAN SSID: Your Choice (make it different from Primary
Router so you can tell the routers apart)
—
WLAN Security: Your Choice (doesn't have to be the same
as Primary Router, but it is recommended so you can
remember it easily)
—
Broadcast Channel: 6 (these channels don't have to be 6 but
it has to match Primary Router)
—
Channel Extension: 10 (Same thing. doesn't have to be 10
but has to match Primary Router)
—
DHCP Server: Disabled
—
Prevent Network Attack (Firewall): Disabled
—
Lazy: Use this mode on the primary router connected
directly to the ISP (modem) when additional routers are
used as additional access points. The secondary routers
router configure
82
MWN-WAPR150N Wireless Router v3.0
each router as