Medialink MWN-WAPR150N User Manual page 30

7. Change The IP Address from 192.168.0.1 to
192.168.2.1. Click Apply. A message will appear,
Click OK. The Router will now begin to Reboot.
8. Once the router has completed the reboot process,
you will automatically be logged back into the router
settings page (DO NOT CLICK NEXT). If you are not
directed back into the router settings page or if you
see "Page Cannot Be Displayed" – still proceed to
step 11.
9. Shut Down Your Computer.
10. Remove The Network Cable from the back of the
computer and from the back of the router.
11. Power Down Your Medialink Router – remove
the power cord from the back of your router.
12. Power Down Your DSL Modem – remove the
power cord from the back of your DSL modem. (DO
NOT press the reset button on your modem as it will
remove all your settings.)
MWN-WAPR150N Wireless Router v3.0
25