Medialink MWN-WAPR150N User Manual page 41

4. Log In To Your DSL Modem - In order to proceed
to Step 5, you will need the account information used
to login to
information would be the IP Address (Typically the
default IP address is 192.168.0.1 or 192.168.1.1.),
User Name (typically the primary email address),
cable). Wait 2 minutes
ii. Power up your DSL modem.
for the modem to fully restart (the
modem is fully restarted when the
lights have been blinking or solid in a
steady pattern
seconds).
iii. Power up your computer.
iv. Confirm access to the internet.
you still have no access, contact
your Internet Service Provider* for
assistance with reconnecting to the
internet – *Before contacting your
Internet Service Provider review
Steps 4-10
additional information or assistance
from them while you already have
them on the line.
your DSL
36
MWN-WAPR150N Wireless Router v3.0
for atleast
as you may
Modem Settings.
Wait
30
If
need
This