Medialink MWN-WAPR150N User Manual page 18

"Medialink".
networks, click on the network name that
begins
Connect).
*Important Note:
requesting a "PIN" – DO NOT ENTER THE PIN
(unless you are experienced with and intend
to enable WPS on all your wireless devices).
Instead, click the option "I don't want to
configure this network I just want to
connect".
Confirm access to the internet. If you are
able to connect to the internet, proceed to
Step 10 Configuring Your Wireless Network.
(for more details on how to connect to a
wireless network see Section 2.4 on page
51)
x
If you cannot access the internet and you do
not have access to your Modem, see instructions
under "2.1b No Modem Access"
x
If you cannot access the internet and you have
a Residential Gateway, Router, or Wireless
Modem try changing the IP address of the Medialink
MWN-WAPR150N Wireless Router v3.0
(Open the available wireless
with "Medialink",
If your computer is
13
Then Click