Medialink MWN-WAPR150N User Manual page 54

a. If the browser does not refresh and allow into the
Medialink router's web-based GUI through the new IP
address you will need to do an IPCONFIG /RELEASE and then
IPCONFIG /RENEW. See Section 5.1 for detailed instructions.
7. Once you are logged back into the Medialink router, name
your wireless network:
Basic Settings. Change the SSID name to a name that will
identify your wireless network (For example:
MyWireless.) Then, Click Apply. (Screen will not change)
8. Setup security for your wireless network: Click WLAN
Settings, then click Security Settings.
choosing
"Help_WirelessNetworkSecurity.pdf"
"Help_WEP_WPA_WPA2.pdf" document located in the
User Guide folder on the CD.)
9. Disable the DHCP Server by clicking DHCP Server,
uncheck Enable, click Apply.
10. Power down the Medialink router, and your original
router by unplugging the power cord from the power
outlet
Click WLAN Settings, then click
your security
49
MWN-WAPR150N Wireless Router v3.0
(For help in
type see
Smith or
the
or