Medialink MWN-WAPR150N User Manual page 15

1. Shut Down your computer.
2. If you have an existing Wireless Router, please
completely disconnect it from your computer and
modem.
3. Power Down Your Cable Modem.
modem's power cord and remove the battery (if
applicable).
a. If you do not have access to the modem,
proceed to Step 4.
4. Connect your Network Cable(s)
a. Plug a network cable from your Cable
modem into your Medialink Router's Blue
WAN Port. (DO NOT connect the included
AC/DC Adapter to the router's Power port at
this time.)
b. Using another network cable, plug one end
to your computer's network port. Plug the
other end into one of the Medialink Router's
yellow ports numbered 1, 2, 3, or 4.
(It is not required to connect a computer to
the router at this point.
recommended for faster setup of your
MWN-WAPR150N Wireless Router v3.0
10
Unplug the
But it is highly