Medialink MWN-WAPR150N User Manual page 34

you will need to power cycle your devices
(Power down all devices then Repeat Steps
16 – 19 to power up). When powering up
devices, make sure each device has
completely restarted before powering up
the next one. Then proceed to Step 21 to
complete installation.
19. Log In To The Router Settings Page - Launch a
web browser such as Internet Explorer or Firefox and
in the address bar enter the Router's IP address,
192.168.2.1. Press "Enter".
*If you did not change the default IP address of the
router in Section 2.2, Step 7 (Page 25) then go back
to Section 2.2 and follow steps 1-19.
20. When Prompted, Enter The Default Login
Information:
Name and Password. Click "OK".
(If you are not prompted to enter the default login
information, you will need to power cycle your
devices (Power down all devices then Repeat Steps
16 – 19 to power up). When powering up devices,
make sure each device has completely restarted
MWN-WAPR150N Wireless Router v3.0
Enter "admin" for both the User
29