Medialink MWN-WAPR150N User Manual page 55

11. Connect an Ethernet cable from the Original Router to
any of the Yellow LAN ports (Not the Blue WAN port) of
the Medialink router. (At this point the Medialink router
will have 2 x yellow ports occupied – one to the computer
and one to the original router)
12. Power up the Original Router, wait 30 seconds for it to
fully restart, Power up the Medialink Router, wait 30
seconds for it to fully restart.
13. Test the internet connection through the computer that is
currently hardwired to the Medialink Router.
a. If you do not have internet through the wired
connection, you may need to power cycle all devices in the
network and start them again slowly starting the device
closest to the ISP connection (Steps 1 thru 8 in Section 2.1)
14. Test the internet connection to the Medialink Router via a
wireless device.
If you still cannot connect to the internet, please
download
www.medialinkproducts.com/support
support at 856-216-8222
the latest
50
MWN-WAPR150N Wireless Router v3.0
FAQ
or please call technical
at