Medialink MWN-WAPR150N User Manual page 13

and you have a Dynamic IP or you're unsure of your
connection type, proceed to Section "2.2 How To
Install The Router – For DSL Modem Users Only" on
Page 23 .
B. ADSL Virtual Dial-Up via PPPoE
(DSL Modem Users)
Some DSL modems must have the PPP protocol
set to Bridge Mode (aka Transparent Bridging).
Speedstream, Actiontec and Westell modems are
some examples of modems that usually require this.
Your ISP can assist you with this or proceed to
"Section 2.2 How To Install The Router – For DSL
Modem Users Only" on Page 23. Once the modem
is set to Bridged, you will not be able to access the
internet through the modem alone. The Medialink
router will be sending your ISP the necessary
username and password to establish the connection
once you have entered them.
C. Static IP, PPTP and L2TP
Static IP, PPTP, and L2TP connections are premium
services. Follow instructions in Section 2.1, Page 9
then , see Section 4.1, Page 59 for assistance in
finishing the configuration of your connection.
MWN-WAPR150N Wireless Router v3.0
8