How T O Install The Router - Dsl Modem Users - Medialink MWN-WAPR150N User Manual

2.2 How To Install The Router – For DSL
Modem Users Only
(and other users who require changing the default IP Address
of the Medialink Router)
Some DSL Modems require the PPPoE connection to be
handled by the router instead of the modem to be able to
successfully create a network using some routers. To begin
installation and to determine if your modem requires
additional configuration as mentioned above proceed to the
instructions below.
Please follow these instructions BEFORE using your new
Medialink router with your DSL Modem.
1. Connect A Computer To The Medialink Router –
Using a network cable, plug one end into the
computer's network port. Plug the other end into
one of your router's yellow ports.
2. Power On The Medialink Router - Connect the
included AC/DC adapter to the router's power port.
Connect the other end into an electrical outlet. Wait
30 seconds to allow the router to fully start.
MWN-WAPR150N Wireless Router v3.0
23