Medialink MWN-WAPR150N User Manual page 44

(Figure 2.1)
13. Check the status of your Medialink Router.
a. On the front panel of your Medialink Router,
the POWER, SYS, WLAN, and INTERNET
(WAN) LED's should be lit or blinking. If not,
make
correctly.
14. Log In To The Router Settings Page* –
*Important Note: You will not yet have access to
the internet.
a. Launch a web browser such as Internet
Explorer or Firefox and in the address bar
enter the router's IP Address 192.168.2.1.
*If you did not change the default IP
address of the router in Section 2.2, Step 7
(Page 25) then go back to Section 2.2 and
follow steps 1-19 first.
MWN-WAPR150N Wireless Router v3.0
sure the cables
39
are connected