Medialink MWN-WAPR150N User Manual page 17

7. Check the status of your Medialink Router.
a. On the front panel of your Medialink Router,
the POWER, SYS, WLAN, and INTERNET
(WAN) LED's should be lit or blinking. If not,
make
correctly.
8. Power ON Your Computer.
a. Turn on your computer
b. It is recommended that you temporarily turn
off any third party firewalls or networking
software during installation of your Medialink
Router.
9. Confirm Access To The Internet –
a. If your computer is wired into the router,
open your internet browser (For example,
Internet Explorer, Firefox or Safari) and
confirm that you are able to access the
internet.
Configuring Your Wireless Network.
b.If your computer is wireless (not wired to the
router), you will need to manually connect to
the wireless network that begins with
MWN-WAPR150N Wireless Router v3.0
sure the cables
If so, proceed to Step 10
12
are connected