Medialink MWN-WAPR150N User Manual page 53

from your computer.
directly to the computer via an Ethernet cable (plug one end
of the Ethernet cable to one of the Yellow LAN Ports of the
Medialink Router. Plug the other end into the network port
of your computer). Then, connect the AC/DC Adapter to the
router's Power port. Connect the other end into an electrical
outlet. Wait 30 seconds to allow the router to fully start.
4. Login to the Medialink router
a. launch a web browser such as Internet Explorer or
Firefox and enter the Router's default IP address,
http://192.168.0.1. Press "Enter".
b. Input the "admin" in both User Name and Password.
c. Click "OK".
d. *Note* Do not Click the "Next" button to run the
installation wizard once you have logged into the router.
5. Click on Advanced Settings and change the IP address to
be the same as the Default Gateway of the Original router
except the last number (ie: if the Default Gateway is
192.168.0.1, make the Medialink 192.168.0.XXX where XXX
can be any number between 2 - 254)
6. Click Apply, and then OK, and the Medialink router will
reboot.
MWN-WAPR150N Wireless Router v3.0
Next, connect the Medialink router
48