Freestanding Refreshment Center - KitchenAid KBFU271 Installation Instructions And Use & Care Manual

8. Apply a bead of all weather clear silicone on the underside of
the two sides of mounting trim.
A. Underside of mounting trim
9. Using two or more people, place the refreshment center into
the cutout. Immediately remove any excess silicone.
10. Connect the plastic tubing from the water filter to the faucet
connection and securely tighten.
A. Plastic tube insert
B. Plastic ferrule
C. Compression nut
D. Plastic tubing from water filter (outlet)
E. Filter
11. Attach the plastic tubing from the water inlet connection to
the inlet side of the filter. Use NSF or UPC listed water
connection line for water supply to inlet connector. Potable
water supply system must be connected to inlet connector
according to local code requirements.
C
A. Plastic tubing
B. Inlet connector
C. Filter
D. NSF or UPC listed water supply line or hose
12. Unwrap the sliding cover and place into frame on top of the
ice bin.
A
A
B
C
D
E
A
B
D

Freestanding Refreshment Center

WARNING
Excessive Weight Hazard
Use two or more people to move and install
refreshment center.
Failure to do so can result in back or other injury.
Use a certified plumber to connect and install potable water
supply and drain system to outdoor refreshment center
according to local code requirements.
1. Check that you have adequate drain connections for the
refreshment center.
2. Remove the faucet from the ice bin.
3. Install the faucet and securely fasten.
A
B
E
A. Faucet
B. Brass escutcheon with "O" ring
C. Sink
D. Plastic washer
E. Locking nut
4. Connect the plastic tubing from the water filter to the faucet
connection and securely tighten.
A. Plastic tube insert
B. Plastic ferrule
C. Compression nut
D. Plastic tubing from water filter (outlet)
E. Filter
C
D
A
B
C
D
E
7