Installation Instructions; Freestanding Outdoor Grill Installation - KitchenAid 720-0733D Installation Instructions And Use & Care Manual

Unpack Grill
1. Remove all packaging materials and remove grill from the 1 R ll k i
shipping base.
2. Move grill close to desired outdoor location.
3. Open the grill hood.
Remove Packaging Material Inside the Grill
1. Use a utility knife to cut yellow straps and packing tape to
open box from top and remove the boxes p p
2. Remove foam block and wrap from inside the grill.
3. Remove the warming rack and grill grates from inside the
grill and remove the package inside the firebox.
Attach Right Side Shelf with Sear Burner
1. Unpack right side shelf with sear burner.
2. Open grill lid.
3. Remove 3 screws from the side of the searing side
A
A. Searing side burner screws

INSTALLATION INSTRUCTIONS

Freestanding Outdoor Grill Installations
i l d ill f h
burner.
4. Loosen 2 screws on the grill side panel but not remove them
completely and remove 1 screw on the grill control panel.
A
A. Grill control panel screws
B. Grill side panel screw
5. Align the bottom key holes of searing side burner bowl 5 Ali h b k
assembly to the 2 screws on the grill side panel which
loosened in step 4 that the searing side burner bowl
assembly will be hung on the 2 screws.
6. Attach the top of the side shelf to the grill (A) by inserting
the 3 screws removed in step 3 into the side shelf from
inside the grill hood and tighten. See illustration in step 8.
7. Attach the bottom of the side shelf to the side panel (B)
of the grill by inserting the 2 screws removed from the of the grill by inserting the 2 screws removed from the
grill side panel in step 4. The drip pan may need to be
pulled forward to install the center screw (C). Tighten the
screws. See illustration in step 8.
8. Attach the side shelf to the control panel (C) by inserting
the screw removed from the grill control panel in step 4.
Tighten the screw.
A A
C
h l f i id b
B
B
b l
13