Installation Instructions; Style 1 - Freestanding Outdoor Grill Installation - KitchenAid KFRU368T Installation Instructions And Use & Care Manual

Kitchenaid outdoor grills freestanding and built-in
Hide thumbs Also See for KFRU368T:
Table of Contents

Advertisement

Available languages

Available languages

The supply line shall be equipped with an approved shutoff valve.
This valve should be located in the same area as the grill and
should be in a location that allows ease of opening and closing.
Do not block access to the shutoff valve. The valve is for turning
on or shutting off gas to the grill.
A
A. Gas supply line
B. Shutoff valve "open" position
C. To grill
LP Gas Conversion Using a Local LP Gas Supply
Conversion must be made by a qualified person. A qualified
Natural gas technician shall provide the LP gas supply to the
selected grill location in accordance with the National Fuel Gas
Code ANSI Z223.1/NFPA 54 - latest edition, and local codes.
WARNING
Excessive Weight Hazard
Use two or more people to move and install grill.
Failure to do so can result in back or other injury.
1. Unpack grill. Remove all packaging materials and remove grill
from wooden skid.
2. Move grill into desired outdoor location.
3. Open the hood.
Remove Packaging Material Inside the Grill
1. Cut the tiedowns holding the grates together.
2. Remove condiment shelf, warming shelf and grill grates from
inside the grill and remove packaging material.
3. Remove foam block and wrap from inside the grill.
A
A. Foam block
B. Foam wrap
10
B
C

INSTALLATION INSTRUCTIONS

Style 1 - Freestanding Outdoor Grill Installation

To convert to LP gas, the LP Gas Conversion Kit Part Number
W10118099 must be used. Follow instructions included with kit.
A. Grill gas pipe
B. New CSA International approved
C. Rear of grill
D. To local LP gas supply
LP Gas Conversion Using a 20 lb LP Gas Fuel Tank
To convert to LP gas, the LP Gas Conversion Kit Part Number
W10118099 must be used. Follow instructions included with kit.
A 20 lb LP gas fuel tank must be purchased separately.
4. Replace the grill grates.
5. Place warming shelf on brackets as shown.
A
6. Attach condiment shelf (on some models) to the inside of the
left cabinet door.
B
7. Dispose of/recycle all packaging material.
A
B
C
D
"outdoor" flexible gas supply line
B
A. Warming shelf brackets
B. Warming shelf
A
B
A. Attachment holes
B. Condiment shelf
A

Advertisement

Table of Contents
loading

This manual is also suitable for:

Kfru488tKbnu367tKbnu487t

Table of Contents