Installation Instructions; Freestanding Outdoor Grill Installation - KitchenAid 810-0021 Installation Instructions And Use & Care Manual

Unpack Grill
1. Remove all packaging materials and remove grill from the
shipping base.
2. Move grill close to desired outdoor location.
3. Open the grill hood.
Remove Packaging Material Inside the Grill
1. Use scissors to cut yellow straps and packing tape to
open box from top and remove the boxes
2. Remove the warming shelf and grill grates from inside the
grill and remove the package inside the
3. Remove foam block and wrap from inside the grill.

INSTALLATION INSTRUCTIONS

Freestanding Outdoor Grill Installations
firebox.
Assemble the Grill
1. Loosen the two screws on top and bottom of two legs, add
the side panel on the top, cross bar on the bottom and slide
into the screws and tighten the screws as shown.
2. Loosen the two screws on top and bottom of two legs, add the
side panel on the top, cross bar on the bottom and slide into the
screws and tighten the screws as shown.
3. Loosen the screws on inside face of leg , slide the cross bar
and rear panel , then tighten the screws as shown
11