Table of Contents
Advertisement
Remote control
1. Comms* specifications
・Control system
・Transmission rate
・Data length
・Star bit
・Stop bit
・Parity
・Bit transfer
2. Comms control
The remote control software controls all communications. Data send/receive (BSC handshake) is by transferring TEXT data
to the camera controller chip.
3. Comms procedure
The following pages indicate the camera controller chip and remote control software data protocol. In the description, the
camera is designated as slave and the software as master.
･Receive protect timer (time out error)
The receive protect timer for master and slave processes is 1 second. For example, if 1 block of TEXT data is being
received, if the data interval exceeds 1 second, error is produced and the data are lost. An acknowledgment of data
receipt is not produced.
: Start-stop synchronization system
: 9600 bps
: 8 bit
: 1 bit
: 1 bit
: None
: LSB first
*Comms: Communications
10
Advertisement
Table of Contents
