Overview; Standard Composition; Features; Auto Shading Correction - Hitachi HV-F202SCL Operation Manual

Overview

HV-F202SCL is high precision 3CCD progressive scan color camera, which has single chip digital processing LSI, a C
mount prism, 1/1.8 inch 2,000,000 pixels square CCD and CameraLink interface.

Standard composition

Check when unpacking
Camera ········································································································ 1
Installation guide ····················································································· 1
Plug for DC IN/SYNC connector (HR10A-10P-12S) ············· 1
Optional accessories
(1) 12 pin plug HR10A-10P-12S(01)
(2) Junction box JU-F30/JC-100
(3) Tripod adaptor TA-F202
(4) Mini-CameraLink cable
(CameraLink standard conformity)

Features

・High resolution and color fidelity
The 1/1.8-inch 2.02 million pixels square lattices progressive scan CCD and dichroic prism for RGB color achieves a high
resolution of UXGA picture and good color reproduction.
・Small and lightweight
The small SDR connector for digital output allows the camera size and mass to be drastically reduced to 55(W) x 55(H) x
89(D) mm / approx. 350g.
・Various picture quality enhancement
Independent size color masking is the Hitachi innovation for optimizing color balance. Saturation and hue of 6 colors (Red,
Green, Blue, Cyan, Magenta and Yellow) can be adjusted independently to deliver the best color in image capture,
microscope and other applications.
In-out gradation control can be arbitrarily adjusted by using LUT.
・Auto shading correction
Color shading due to aberration of the lens is automatically compensated or reduced.
・Versatile CCD drive functions
Video frame capture on demand using external trigger signal
Long integration mode (max. 10 seconds)
Variable shutter mode (min. 1/100,000 second)
Auto electronic shutter mode

System example

HV-F202SCL connects to frame grabber board using Mini-CameraLink cable.
HITACH
3CCD
HV-F202SCL
In the CE Marking region, use following specified cables and clamp filters
Approx. 100 to 150 mm
Camera cable (C-201KSS) / Mini-CameraLink cable
(5) Cameracable
2m
5m
10m
In the CE Marking region, use the shield type and attach clamp filter (ZCAT 2035-0930A:
TDK) at both ends (camera and video processor ends). Refer to System example.
Note : When not using the specified junction box, Mini-CameraLink cable, camera cable and
clamp filter, malfunctions may be caused.
Camera cable
Mini-CameraLink cable
(x 2 when Medium configuration)
Clamp filter
(ZCAT 2035-0930A: TDK)
Molded type Shield type
C-201KSM C-201KSS
C-501KSM C-501KSS
C-102KSM C-102KSS
CameraLink
frame grabber board
AC adaptor
1