Alamo Industrial Traxx RF Operator's Manual page 164

2. When supporting the mower on the stand, be
sure that the tracks can roll freely and are not
obstructed.
A rolling stand as shown can be used to
support the mower. The stand is firmly attached
to the mower frame at the roll bar mounting
locations.
The Mower Head should be removed when
lifting the mower.
3. Remove the track tensioner adjustment cover
on the side of the frame assembly (both sides)
to gain access to the tensioner grease fitting
and nut.
TRAXX RF 04/14
© 2014 Alamo Group Inc.
MAINTENANCE
Maintenance Section 5-20