Alamo Industrial Traxx RF Operator's Manual page 110

OPERATION
CUTTING HEAD
• 51" (1.3m) medium duty flail head.
• Auto-float capability to follow ground contour.
• The cutter housing is constructed of 3mm S355 RAEX™ high strength steel.
• Housing end plates is constructed of 5mm S355 high-strength, low alloy, structural steel plate.
• Cuttershaft made of 3-1/2" dia. x .39" thick tube and supported by double row tapered roller bearings.
• A full width, adjustable rear roller to evenly control the cutting height.
• Roller is constructed of 4" dia. x .16" thick tubing.
• A center-feed hydraulic door exposes the blades for more aggressive cutting in unruly vegetation.
PROTECTION AND SAFETY
• One-touch emergency shut-off switch.
• Automatic Warning (Horn) on slopes greater than 60º
• Roll guard frame with LED strobe light.
• Automatic shutdown if excessive slope angle depletes engine oil pressure.
OPTIONAL EQUIPMENT
• Rubber tread tracks for turf grass applications.
TRAXX RF 04/14 Operation Section 4-4
© 2014 Alamo Group Inc.