Alamo Industrial Traxx RF Operator's Manual page 158

Change filter according to procedure "HYDRAULIC
FILTER REPLACEMENT" in maintenance section.
NOTE: Always replace filters at the intervals stated
in the maintenance schedule using quality original
filters as specified
manufacturer.
• Refill the hydraulic oil tank with 'PANOLIN HLP
SYNTH E 46' hydraulic oil or Panolin HLP
Synthetic 46 hydraulic oil. Check using the
dipstick until the level is correct.
• Start engine and allow to run 2 minutes.
• Stop engine and re-check oil level on the
dipstick, top off if the level has dropped.
• Check all components and covers are tightly
secured before using the machine.
TRAXX RF 04/14
© 2014 Alamo Group Inc.
MAINTENANCE
and supplied by the
Maintenance Section 5-14