Engine Shutdown - Alamo Industrial Traxx RF Operator's Manual

OPERATION

10.3 Engine Shutdown

Before shutting down the engine all machine
movements must be halted, engine revs reduced to
mini-mum and the rotor switched off. Allow the
machine to run at this level for about 1 minute to
stabilize pressures and temperatures. Shutting
down the engine is then performed by pressing
button 'Q' which will stall the engine.When the
engine has stopped the procedure is completed by
switching off the ignition key on the machine. Press
the STOP button 'C' for shutdown the radio.If the
machine is to be left unattended, the key should be
removed and control unit and key placed in a
secure location.
Reversible Fan Control
Reversible Fan is a built in 'Self-Clean' feature
designed to reduce the build up of dirt and dust in
the radiator matrix. Upon activation of the control
switch 'F', the blades of the fan change angle
diverting air flow back through the radiator thus
removing dirt and dust particles. Although
Reversible Fan automatically cleans at preset
periods, the operator control allows the user to
override the function to perform additional cleaning
cycles when working in dirty or dustier conditions.
(See Maintenance Section)
TRAXX RF 04/14 Operation Section 4-30
© 2014 Alamo Group Inc.