Flail Head (Tool) Height Control - Alamo Industrial Traxx RF Operator's Manual

9.4 Steering Bias
The steering bias feature allows a degree of 'Steer
to be pre-set for operating the machine across
slopes, adjustment is made using the dial switch
'E'; rotate the dial
counterclockwise for right or left bias respectively,
the further it is rotated the greater the bias.
Although steering will still need to be monitored
and operated as normal it will be to a much lesser
degree.

9.5 Flail Head (Tool) Height Control

The tool height is controlled by forward and
backwards operation of the right-hand joystick (B);
pushing the lever forwards will forwards will lower
the tool and pulling the lever backwards will raise
the tool.Flail Head Rotor Controls.
Lower mower to the ground and release the rod of the cylinder to reach the center of the
slot. This way the tool will follow the contour of the ground better. (float effect).
TRAXX RF 04/14
© 2014 Alamo Group Inc.
OPERATION
either clockwise or
Operation Section 4-22