Manual Track Control - Alamo Industrial Traxx RF Operator's Manual

5. Manual Track Control

• A manual track device control is provided with each machine to allow an operator to bypass the Radio
Controller in the event of a failure.
• Can be used to troubleshoot an issue.
• Controls movement of the tracks and lift or lower of the cutting head.
• Operation of the Manual Drive is automatically done at the lowest idle setting (no idle control), and with the
cutter off.
• Is to be used ONLY for emergency transport due to a breakdown, or for diagnosing an issue with the
controller.
• NEVER attempt to operate the mower with the manual drive.
• Manual Drive Controller - For Units with SN 000322 and below unplug the black controller Marked "T"
under the hood located in the front corner of unit.
A. Left Track Forward
B. Left Track Backwards
C. Equipment Lift
D. Equipment Lower
E. Right Track Forward
F. Right Track Backwards
TRAXX RF 04/14
© 2014 Alamo Group Inc.
OPERATION
Remove
Connection on the Electronic (Ignition) Box, and
install the Manual Control Cable.
Operation Section 4-10
the Dust Cover from the Wire