4
How to control the unit
4.1 DMX controller
You can operate the unit in three ways:
1.
By the built-in preprogrammed function
2.
By the universal DMX controller
Using the universal DMX controller to control the units, you have to set the DMX address from
1 to 512 channels so that the units can receive the DMX signal.
Press the 'MENU' button up to when 'DMX Address' is showing up on the display. Press the
'ENTER' button and the display will blink. Use the 'DOWN' and 'UP' buttons to change the
DMX512 address. Once the address has been selected, press and keep the 'ENTER' button to
store. To return to the functions without any change press the 'MENU' button or wait for one
minute.
novaWASH Quad LED
How to control the unit
23