Table of Contents
Advertisement
STEP 1: REAR STABILIZER ASSEMBLY
1. Install the Rear Stabilizer (5) onto the Main Frame (1) with the 4pcs of 3/8" x 2-1/4"
Hex Head Bolts (50) and 4pcs of 3/8" x 25 x 2T Flat Washers (71) by using the
12/14mm Wrench (100).
HARDWARE
#71. 3/8" × 25 × 2T
Flat Washer (4 pcs)
Customer Service 1-888-707-1880
Email: customerservice@dyaco.ca
#50. 3/8" × 2-1/4"
Hex Head Bolt (4 pcs)
6
Dyaco Canada Inc. 2013
Advertisement
Table of Contents
