Table of Contents
Advertisement
Assembly Instructions 161167355
Assembly Video
To assist you in assembling your new Spirit Fitness bike, we have posted an
assembly video at the following link:
http://www.spiritfitness.com/customerservice/video/fitnessbikevideos.html
Pre-Assembly
1. Using a razor knife (Box Cutter), cut the banding straps that wrap around the
carton. Reach under the bottom edge of the carton and pull it away from the
cardboard underneath, separating the staples that join the two together. Lift the
box over the unit and unpack.
2. Carefully remove all parts from carton and inspect for any damage or missing
parts. If damaged parts are found, or parts are missing, contact your dealer
immediately.
3. Locate the hardware package. The hardware is separated into four steps. Remove
the tools first. Remove the hardware for each step as needed to avoid confusion.
The numbers in the instructions that are in parenthesis (#) are the item number
from the assembly drawing for reference.
Assembly Tools
#93. Phillips Head Screwdriver
Customer Service 1-888-707-1880
Email: customerservice@dyaco.ca
#100. 12/14mm Wrench
5
#92. 13/15mm Wrench
Dyaco Canada Inc. 2013
Advertisement
Table of Contents
