Table of Contents
Advertisement
Operation of Your Console
Power on
When the A.C. Power cord is connected to the fitness bike, the console will automatically
power up. If there is no input to the console for 20 minutes the console will go to stand-by
mode. In stand-by mode the console display will turn off. To turn the console on press any
key.
When initially powered on the console will perform an internal self-test. During this time all
the lights will turn on. When the lights go off, the Message Center will show the software
version (i.e.: VER 1.0). The distance window shows the distance in miles and the time
window shows the total hours of use.
The dot matrix display will be scrolling through the different profiles of the programs and the
message window will be scrolling the start up message. You may now begin to use the
console.
13
Customer Service 1-888-707-1880
Dyaco Canada Inc. 2013
Email: customerservice@dyaco.ca
Advertisement
Table of Contents
