Specifying Destinations Using the New Address Tab
You must specify the destination (such as a fax number, e-mail address, I-fax
address, or file server address) to send documents. This section describes the
procedure for specifying destination that has not been stored in the Address Book.
2
IMPORTANT
The destination that you just specified is not stored in the Address Book. It is deleted
once the document is sent.
NOTE
•
If you frequently send documents to the same destinations, store these destinations in
the Address Book beforehand. (See "Storing New Addresses," on p. 10-5.)
•
A maximum of 64 new addresses and addresses obtained via a server (User Inboxes are
not included in this count) can be specified at the same time.
•
You can specify e-mail addresses, I-fax addresses, file server addresses, and a User
Inbox.
•
If the optional Super G3 FAX Board or Super G3 Multi-Line Fax Board is installed, you
can specify fax numbers in addition to the above mentioned destinations.
To view the detailed information of a selected destination, select the destination ➞ press
•
[Details].
•
You can change, edit, or erase destinations on the Send Basic Features screen before
scanning. (See "Checking/Changing a Destination," on p. 2-35, or "Erasing a
Destination," on p. 2-37.)
Specifying a Fax Number
You can specify a new fax number using
also specify several numbers in succession, and send the original to several
destinations in a single operation (Sequential Broadcast).
1
2-2
Specifying Destinations Using the New Address Tab
Press [New Address] ➞ [Fax].
NOTE
If no destination is displayed on the Send Basic Features screen, pressing
(numeric keys),
, or
the screen shown in step 2, which enables you to enter the fax number.
-
(numeric keys),
without pressing [Fax] on the New Address tab, displays
, and
. You can
-