Changing The Current Standard Settings; Storing New Standard Settings - Canon imageRUNNER 2545i Copying Manual

Changing the Current Standard Settings

Standard Settings in the Copy Settings in the Additional Functions menu refers to a
combination of copy modes that is applied such as when the machine is turned ON
or when
changing the copy modes stored as the Standard Settings.
4

Storing New Standard Settings

You can store your own copy settings as the Standard Settings. To store your own
Standard Settings, specify the desired settings on the top screen and/or the Special
Features screen, and then follow the procedure below.
1
4-4
Customizing the Copy Settings
(Reset) is pressed. This section describes the procedure for
NOTE
• The setting combination stored as Standard Settings is applied when:
- the machine is turned ON or wakes from the Sleep mode.
- (Reset) is pressed (except while copying).
- the Auto Clear function initiates.
• The Standard Settings (the factory default settings) are:
- Number of Copies: 1
- Copy Ratio: 100%
- Paper Source Selection: Auto
- Density and Original Type: Auto
- 2-Sided: Off
- Finishing: Off
- 2-Page Separation: Off
- Image Combination: Off
- Frame Erase: Off
- Different Size Originals: Off
- Sharpness: middle (center)
- ID Card Copy: Off
- Booklet: Off
(Additional Functions) ➞ [Copy Settings].
Press
For help, see step 2 in "Auto Orientation," on p. 4-2.