I-Fax Settings; Full Mode Tx Timeout; Divided Data Rx Timeout - Canon Color imageRUNNER C3480 Sending And Facsimile Manual Sending And Facsimile Manual

2
Select [On] or [Off] ➞ press [OK].
Details of each item are shown below:
[On]: The e-mail address of the authorized user is set as the sender destination
[Off]: The e-mail address set for the machine is set as the sender destination in

I-Fax Settings

You can change the I-fax transmission settings. The following settings are available.

■ Full Mode TX Timeout

Sets the time that elapses before sending operations terminate (automatically) if you do
not receive a notification e-mail message (MDN) from the recipient when you send an
I-fax in the Full Mode.

■ Divided Data RX Timeout

If it takes longer than the set Divided Data RX Timeout time to receive all the parts of a
divided I-fax document, only the data which has been received is combined to form the
document. Data which can be combined to form complete pages is printed, and any
remaining data is erased.
IMPORTANT
•
If you delete the divided data, it cannot be combined to form a document even if the
remaining divided data is received later.
•
Divided data cannot be printed as a regular image unless it has been combined.
•
If you select [Print When Erased] on the Divided Data RX Inbox screen for the Mail Box
function to print the data which is erased, the data will not be forwarded or stored in
memory. It will only be printed.
■ Print MDN/DSN on Receipt
Sets whether to print notification e-mail messages that inform you of the successful
delivery of I-fax jobs sent using the Full Mode.
■ Always Send Notice for RX Errors
Sets whether to inform the sender that the e-mail message or I-fax was not received
successfully.
■ Use Send Via Server
Determines whether you can select to send jobs via a server on the screen for specifying
I-fax destination settings. To be able to select 'On' or 'Off' for <Send Via Server> on the
I-fax settings screen, set <Use Send Via Server> and <Allow Not Via Server> to 'On'
beforehand.
in the From field on the received e-mail message.
the From field on the received e-mail message.
Communications Settings
11
11-7