Canon Color imageRUNNER C3480 Sending And Facsimile Manual Sending And Facsimile Manual page 312

5
10
10-26
Storing New Addresses
❑
Enter the search criterion ➞ press [OK].
❑
Press [Add].
To continue adding more search criteria, press [or] or [and] ➞ repeat step 4.
[or]: The machine searches and returns a result for either of the specified
search criteria.
[and]: The machine searches and returns a result for all of the specified
search criteria.
To edit the search criteria, select the search criterion that you want to edit ➞
press [Edit] ➞ [Settings].
To delete the search criteria, select the criterion that you want to erase ➞
press [Erase].
NOTE
•
You can specify up to four different search criteria at a time.
•
If you specify three or more search criteria, you cannot use both [or] and [and]
together.
•
If you press [Simple Search] after specifying search criteria on the Detailed Search
screen, the display changes to the Simple Search screen, and the specified
detailed search criteria are deleted.
Press [Start Searching].
To cancel searching while the machine is searching for your criteria, press
[Cancel]. If the machine finds some results before you press [Cancel], these
search results are displayed.
IMPORTANT
•
Searching for a destination via an LDAP server is not possible if the time setting of
the server and the time setting of the machine are more than five minutes apart. If
you cannot send even when the user name and password are correct, check the
time settings on the server and the machine.
•
The number of search results displayed will not exceed the maximum limit set in
Register LDAP Server in System Settings (from the Additional Functions screen). If
the desired destination is not displayed, either increase the maximum number of
addresses to search, or change the search criteria. (See "LDAP Server Settings,"
on p. 11-46.)
NOTE
If you press [Start Searching] without specifying any search criteria, all the
addresses stored on the LDAP server are displayed.