2
Press [Done] ➞ [OK].
3
Press
(Start).
NOTE
To cancel scanning, press [Cancel] or
4
When scanning is complete, place your next batch of originals
➞ press
(Start).
If you want to change the scan settings, change them before pressing
You can select the document size. (See "Document Size," on p. 3-8.)
You can change the scan exposure and the original type settings. (See "Scan
Exposure and Original Type Settings," on p. 3-13.)
You can change the color mode setting. (See "Changing Color Modes," on p.
3-21.)
You can change the one-sided or two-sided original setting. (See "2-Sided
Original," on p. 3-4.)
● If the original is two-sided:
❑
Press [2-Sided Original].
❑
Select the type of two-sided original ➞ press [OK].
(Stop).
Job Build
(Start).
4
4-11