Table of Contents
Advertisement
Section 2 – Product Overview
2.1 – Introduction
Thank you and congratulations on the purchase of your new TI45014D Battery Charger/Conditioner.
This manual contains the complete operating instructions and procedures for the TI45014D Battery Char-
ger/Conditioner. The TI45014D Battery Charger/Conditioner has been designed to rapidly recharge any
12 or 24 volt battery. This Battery Charger/Conditioner incorporates an intelligent recharging circuit that
prevents overcharging and provides pure dc output for efficient battery charging and conditioning.
The TI45014D Battery Charger/Conditioner is encased in a rugged enclosure, and is designed to be used
as a free standing unit, or to be mounted to a vehicle or other fixed object using the integrated mount-
ing base. All models include a detachable ac line cord and an interchangeable dc output cable (alligator
clamps for rapid connect and disconnect).
•
Accepts both 120 Vac or 240 Vac and charges 12V and 24V batteries.
2.2 – Indication of Terms: Shall, Should, and May
Within this technical manual the word "shall" is used to indicate a mandatory requirement for proper oper-
ation and warranty purposes. The word "should" is used to indicate a non-mandatory but preferred method
of accomplishment. The word "may" is used to indicate an acceptable method of accomplishment.
TI45014D Battery Charger/Conditioner
Figure 2.1.1 – TI45014D Battery Charger/Conditioner IEC
3
Advertisement
Table of Contents
