Product Overview; Product Specifications - Tesla Gen 3 Wall Connector Manual

PRODUCT OVERVIEW

This manual applies to Wall Connectors identified by part number 1457768-**-*.

Product Specifications

Voltage and Wiring
Current Output Range
Terminal Blocks
Supported Conduit Sizing
Grounding Scheme
Frequency
Cable Length
Wall Connector Dimensions
Wire Box Bracket Dimensions
Weight (including wirebox)
Operating Temperature
Storage Temperature
Enclosure Rating
Ventilation
Means of Disconnect
Ground Fault Circuit Interrupter
Wi-Fi
Agency Approvals
Transportation and storage: Ensure that Wall Connector is within storage temperature when moving,
transporting, or storing.
This device complies with part 15 of the FCC Rules. Operation is subject to the following conditions: (1)
This device may not cause harmful interference, and (2) this device must accept any interference
received, including interference that may cause undesired operation.
4
Nominal 200-240 V AC single-phase
12 – 48 amps
12-4 AWG (3.5 - 25 mm
¾" (21 mm) default, 1" (27 mm) optional
TN/TT
50/60 Hz
8.5' (2.6 m) or 18' (5.5 m)
Height: 13.6" (345 mm)
Width: 6.1" (155 mm)
Depth: 4.3" (110 mm)
Height: 9.8" (250 mm)
Width: 4.7" (120 mm)
Depth: 2.0" (50 mm)
10 lb. (4.5 kg)
-22˚F to 122˚F (-30˚C to 50˚C)
-40˚F to 185˚F (-40˚C to 85˚C)
Type 3R
Not required
External branch circuit breaker
Integrated, no additional required (CCID20)
2.4 GHz, 802.11b/g/n
cULus - E351001
2
), copper only
Gen 3 Wall Connector Manual