Tools and Materials Required
Before installing the Wall Connector, gather the following tools and materials:
•
Pencil or marker
•
Hole punch (optional, to push through cardboard template)
•
Phillips screwdriver
•
T20 security pin Torx driver
•
Level
•
Machine drill
Overview of Installation Steps
Warning: After an outlet is properly installed, TURN OFF AND VERIFY POWER IS OFF
BEFORE CONTINUING.
Then follow these steps to install the Wall Connector:
•
Install the Low Profile Bracket.
•
Connect the wall connector to the bracket
•
Plug in and power up
Step-by-Step Installation Instructions
Step-by-Step Installation Instructions
9